Tackling moisture problems? How do you proceed?
Do you suffer from damp patches or mold in your home? Then it is important not to postpone the problem. Moisture problems never disappear on their own; on the contrary, they worsen over time and can lead to structural damage and health problems.
The most common cause of rising damp is the absence or damage to the water-resistant layer. Without this layer, your wall comes into direct contact with the damp subsoil, causing ground moisture to rise and saturate the wall.
Why Acting Quickly is Crucial
-
The longer you wait, the deeper the moisture penetrates walls and floors
-
Repair costs increase as the problem worsens
-
Molds and musty air spread faster
-
Indoor air quality and health deteriorate
Solution for moisture problems? Call free for more info 0800/61 667
Do you suffer from damp patches, peeling plasterwork, or mold growth on your walls?
Then there is a good chance that you are dealing with rising damp, a common problem in Belgian homes.
At Solusio, we have years of experience in moisture control and offer sustainable solutions that tackle the moisture at its source.
The most Used Solution against Rising Damp
The most popular and efficient method to combat rising damp is wall injection with a moisture-resistant agent.
With this technique, small openings are drilled into the wall into which a special injection gel is applied.
The gel forms an invisible, waterproof barrier in the wall that prevents ground moisture from rising further.
There are different types of injection agents (based on silanes or siloxanes), but they all work according to the same principle: they stop the rising damp and at the same time allow the wall to breathe, so that it can dry out again.
Tackling Moisture Problems: the Problem
The problem of rising damp is generally known within the construction sector.
It usually arises from a missing, worn, or poorly placed damp-proof course.
As a result, the masonry comes into direct contact with damp subsoil, which leads to:
-
wet or dark wall zones at the bottom,
-
peeling plasterwork,
-
mold growth,
-
and an unhealthy indoor climate.
Architects and contractors encounter this problem daily, but with the right approach, it can be completely resolved.
Tackling Moisture Problems: the Diagnosis
At Solusio, we always start with a free moisture diagnosis.
An experienced moisture specialist comes on site for a moisture measurement and investigates:
-
the moisture content of the masonry,
-
the condition of the damp-proof course,
-
and the presence of molds or wall salts.
After a thorough analysis, we determine together the most effective treatment for your specific moisture problem.
Tackling Moisture Problems: the Methodology
Depending on the severity of the problem and the building structure, Solusio chooses a wall injection or underpinning of the walls.
1. Undercutting of walls
With a specially designed sawing system, a horizontal groove is made in the wall just above floor level.
This technique is mainly used in older buildings without a damp-proof course.
2. Placement of a moisture-resistant film
A durable, transparent, waterproof film is placed in the sawn groove.
The film is incorporated into a shrink-free, hydrophobic mortar, adapted to the width of the wall.
This creates a complete barrier against rising damp.
3. Applying support
To guarantee the stability of the wall, support wedges are placed every half meter in the groove.
These remain permanently present to prevent settling of the wall and ensure a structurally safe execution.
Tackling Moisture Problems: Guarantee & Quality
At Solusio, quality and sustainability are central.
Our approach is based on the technical guidelines of the WTCB (Scientific and Technical Center for the Construction Industry) and meets all applicable standards for moisture control.
We also offer a written guarantee on our treatments, so you can be sure of a permanently dry wall and a healthy indoor climate.
Suffering from rising damp or moisture problems in your home?
Don’t let it get worse. Our experts are happy to come by for a free and non-binding moisture diagnosis.
Call 0800/61 667 for free or mail to info@solusio.be
for a professional analysis and a definitive solution against rising damp.
